Control & Power Cables
AC General Control Cables are generally used for PDU remote control and come with any PDU with remote control. The cables are connectorized with circular plastic connectors to provide positive electrical contact. The cables are durable and flexible enough for any equipment rack application.
AC General Power Cables are used to carry line rated power into or out of your Equipment Rack.
If you don’t spot a control cable that works for your application or need a replacement, contact AC General. We can provide you the exact cable you need.
Explore the tabs below to learn more.
Need More Information?
Interested in learning more about this product or how AC General can custom engineer a product specifically to fit your needs?
The easiest way to reach us is through our online contact form.
Control Cables
Power Cables
Documents
Overview
All PDUs equipped with remote control include the necessary control cables. AC General also provides an optional connector to allow a remote controlled PDU to operate without needing a control panel.
Only the most common control cable used for PDU remote control is shown.
Need a replacement cable or something different? Use the Contact form, tell us what you need, and we’ll get right back to you.
Part Numbers:
- P/N 400-012-08
- P/N 400-029
- Standard remote control cable used for most all “R” and “R1” remote controlled PDUs
- 8 ft. jacketed cable is standard length
- Circular plastic connectors are easy to insert/remove
- This pre-wired connector is used to bypass the PDU remote control panel
- Used with any standard PDU configured with a “R1” or “R” remote control option
- Simply plug into the PDU REMOTE connector and then switch use the main PDU breaker to switch all PDU power
- Circular plastic connectors are easy to insert/remove
Overview
Why make you your own cables? AC General can provide you with power cables made with rock solid industrial quality connectors and strong flexible cable. All connectors are identified with service rating and possess excellent gripping design for easy insertion/removal. These cables are ideal for ATE applications, equipment racks, and for factory/depot test environments.
If you don’t spot a power cable that works for your application, contact AC General. We can provide you the exact configuration you need.
Connector Types
Cable Configurations (*)
Specifications
Power cable
20A 125V Service: Type SO, 600V rated, AWG 12/3, Grounded
30A 125V Service: Type SO, 600V rated, AWG 10/3, Grounded
20A 120/208V Service: Type SO, 600V, rated AWG 12/5, Grounded
30A 120/208V Service: Type SO, 600V, rated AWG 10/5, Grounded
Connectors
All connectors are “locking”, UL Listed
Labels
Cable ends are labelled “P1”, “P2”. Other labelling is available upon request
Ordering Information
Part Number
Note: The three phase 4P/5W 400Hz cable is only available in 20A
To specify a power cable:
- Create a part number by determining your Amperage, Voltage, Connector types on either end, and cable length
- Request a Quote form AC General for the part number(s)
Document | Description | Link |
---|---|---|
Data Sheet | Product sheet for common control cables used for Remote Control | |
Data Sheet | Product sheet for common sinlge and three phase NEMA power cables used for supplying power into or out of PDUs | |
Data Sheet | Think Safety...use an AC General Electrical Lockout panel. Click on the link to see our 20A, 30A, 60A, and 100A Lockoout Panels |